Inside the car there are 4 more 13mm bolts under the backseat and sometime 2 more 17mm just behind these in the corners. I always remove all the seats first.
Under each rear fender near the top shock bolt is another 17mm bolt
in a bracket.
All this is
the same on a super beetle since they are identical from the windshield
back. On the standard beetle (we will come back to the super later)
there are 2 more 17mm bolts under the gas tank, which is easily removed.
I always pull the motor but if you want to leave it with the chassis you can disconnect the wiring. The cables are OK. You will have to remove the wires from the starter. You can leave the battery cable. There may be a couple of easily disconnected heater vent cables at the rear of the tunnel on the later bugs but that is about it on the standard. Four guys in pretty good shape can lift the body off. Here is a way one guy can do it alone. We have a couple of 8' wide saw horses we set the body on.
With the body lose you can jack up the front of the car from under the chassis and then set the saw horse under the bumper and bolt it with a safety chain. (We wiggled one off once so we always use them) Now let the chassis down and do the same in the rear. Now you can roll the chassis out from under if you like. (You may need to remove the gear shifter to clear the sawhorse.)
TEXT & PHOTOS ORIGINAL BY:
SuperBeetles.com
1 comentarios:
BMW Remaps develop our tuning programmes in laboratory conditions on real vehicles, where dynamometer and emissions readings allow us to verify our figures. BMW Remaps then test the results of BMW Remaps work on the roads in real life conditions for many hundreds of miles – nothing is left to chance.
Publicar un comentario